How to make a hanger with your own hands?
In everyday life there are different situations, sometimesthere is a need to independently build something from improvised means, or urgently to make a fairly simple thing. One of these things can be a hanger, whether it's an ordinary hanger "hangers", a floor hanger or a wall hanging in the hallway. No matter how difficult this task seemed to be at first glance, in fact, virtually every person can cope with it. Let's take a closer look at step-by-step instructions on how to make a hanger yourself.
Hanger-hangers from wire
The simplest variety of hangers by rightregular "shoulders" are considered. To create them, you need the least amount of material and effort. Before you make a clothes hanger of this type, you should stock up on all the necessary materials. To create ordinary "hangers" we will need hard wire, tape, thread and foam rubber. The number of materials depends on the urgency and need for aesthetic beauty of such a hanger. For example, you can just do with a wire. To do this, take the wire and, starting from the top, bend it in half, twisting the two parts in the form of a spiral. Then bend the spiral in the form of a question mark, pointing one end to the left and the other to the right. Having arranged the ends of the wire in the form of a hanger, connect them and twist one end around the other. So we get a hanger-hanger. To perfect the received product and decorate it, wrap the hanger with foam rubber, fix it with threads and wrap tape around the whole surface. Such a hanger may well become a creative gift for friends and family.
The instruction of creation of an outdoor hanger
Here are some useful tips to help you make a floor hanger yourself:
- Use an old chair with a backrest to create an outdoor hanger.
- Separate the back of the chair with two legs attached to it, from the seat with a hammer or saw.
- In order to make the hanger stable, attach the two remaining from the seat, the legs at an angle of 45 degrees to the legs of the hanger.
Such a floor hanger canstorage of jackets, jackets, coats or shirts. However, most people prefer to simply use a chair as a hanger, which greatly simplifies the task.
Wall hanger in the hallway
The hanger in the hallway can be of different types - floor or wall. Consider in more detail how to make a hanger in the hallway of the wall type. To do this, you need these tools:
- A hammer;
- A wooden board 1 meter long, 20 cm high and 2-3 cm thick;
- Metal hooks and nails;
- A dowel, a drill, a screwdriver.
So, to build a wall hanger, follow the following instructions.
- Attach the metal hooks to the board with nails. The gap between the hooks should be about 10-15 cm. The same should be the indentation from the beginning and end of the board.
- Drill two holes in the board (top of the board, left and right side). Identical holes drill in the wall, at the level where the hanger should be.
- Insert the dowels into the holes in the wall and screw the hanger to the wall.
The functionality of the created hanger depends on thehow well all the elements were fastened, and also how deep the dowels are. If everything was done correctly and reliably, you can hang 3 to 5 jackets or raincoats on such a hanger. Also, you can hang on one of the hooks hanger-hangers and use it in the case of especially creasing clothes.
Hanger floor for the hallway
We have already considered earlier how to make a hangerdifferent types, and there was only one more hanger left - floor for the hallway. An outdoor coat rack in the hallway can be made from an old floor lamp. For the basis of such a hanger, it is necessary to remove the top of the floor lamp and unscrew the bulb. Also we need two boards (length 40 cm). It is necessary to connect the two boards at an angle of 90 degrees with the help of nails. Then the resulting cross-shaped top is attached to the top of the floor lamp. You can do this with a rope or tape. In order that such a coat of arms names are more likeable look, it can be completely wrapped with ribbon or colored scotch tape.