Corner toilet with cistern: the pros and cons, the scheme and features of the toilet in the corner
The parameters of the bathrooms in the apartments do not always have sufficient area for the standard placement of all key sanitary appliances. The solution to this problem lies in a clear thinking over the location and the choice of compact models of function-key items.
For example, a corner toilet with a cistern is an advantageous solution for the original design of an adjacent bathroom.
Advantages and disadvantages of angle devices
The toilet, located in the corner, has a practically similar construction, as in the standard version. The only difference expressing this type of installation is the triangular shape of the drain tank. The volume is not reflected in any way.
With the help of a corner monoblock, you can not only expand the free space in the bathroom, but also add an extraordinary model to the interior of the room.Due to the filling of corners with sanitary devices, the room acquires rounded shapes with extensive internal space.
In the Compact model, the bowl is divided with a drain cistern, which through the installation is sewn into a corner niche. The design, equipped with a hanging toilet, is quite weighty - its carrying capacity is almost half a ton.
If the apartment has separate bathroom rooms, then the use of a corner installation in the toilet will make it possible to place additional appliances, such as a bidet. In addition to all the considered models can be adjusted in height to 4 cm.
Separate praise deserves the strength of the drain tank, made of solid material. Leaks are excluded.
If for any reason the drain tank breaks or cracks appear, you can not worry about your neighbors from below, the risk of flooding is minimal.Due to the emergency system equipment, at the moment of overflow, the surplus network water will be redirected to a special overflow channel.
There is a slight minus in such devices. It is connected exclusively with the method of installation of mounted products. The wall on which the installation is to be performed must be strong enough to withstand the intended weight.
When it comes to plasterboard overlap, it will be necessary in advance to place a solid wood mortgage under the cladding and produce fastenings with long bolts to pass through the wooden part and sufficiently deep in the main wall.
What are the types?
Consumer demand for non-standard plumbing devices tends to increase. In addition to the originality of the device itself, its main characteristics are also appreciated: comfort and functionality.
An important role is played by the design of the structure. In addition to the shape of the cistern, visually angular toilet is no different from the standard model, but this is not the case - there is also a difference in the installation.
Instrument making material
Despite the fact that the model range of corner toilets is less extensive in comparison with the classics, it is still possible to choose an interesting option.
The materials used for the production of corner sanitary models, standard. The toilet can be made of:
Thanks to modern technology, plastic devices are made from acrylic, additionally reinforced with fiberglass and special resin. The ease and simplicity of the product, a high degree of strength and non-porous structure - these are the main advantages of such installations.
The disadvantages include poor resistance to mechanical damage and temperature extremes.
The increased degree of durability of porcelain toilet bowls is complemented by a high operational period. The basis of the production process is white clay, with the addition of natural minerals - quartz and feldspar. Glaze is traditionally used as a topcoat.
It is this composition that makes the structure of the device less porous, and, accordingly, simplifies care for it. Its main drawback is the high cost.
The most popular models from the affordable price range are faience. Plumbing, made of earthenware, before the final stage of glazing is fired.
These manufacturing processes help to make the toilet durable, with high levels of protective functions, as well as reduce the porosity of the material, making it easier for housewives to take care of daily care. The service life of the product reaches 15 years.
In rare cases, you can find exclusive models of expensive materials: bronze, natural or artificial stone, steel. Due to low consumer demand for this kind of goods, manufacturers are not in a hurry to replenish the model range.
If we take the standard version, the best products are made of porcelain. The use of materials with high quality in the production,with a low degree of moisture absorption, allow you to create a model that, over time, does not lose its original qualities, both functional and visual.
Suggested Bowl Types
Depending on what type of bowl is used in a particular corner installation, due to the degree of comfort during operation, volume, the number of splashes during flushing and efficiency in water consumption.
The market offers a choice of three options: with a shelf, funnel, with a slope of the back or front wall.
Corner toilet with a shelf has a lot of drawbacks. Due to the fact that all the emptying products initially remain on the stage of the device, there will be a characteristic unpleasant smell in the bathroom. Also, after washing off, it is almost always necessary to use a brush to remove residues.
In addition, the bowl forms a water seal, in which water is always present. But when using water of poor quality, as well as due to the deposition of urinary salts, plaque is formed and rust can appear.
This type of product is no different and economical water consumption.Its only plus is a flush with virtually no sprays.
The next type of bowl has a slope of the front or rear wall, which is why the corresponding name of the plumbing device is with a slope. Such features allow minimizing the penetration of unpleasant odors.
This is due to the fact that, by means of a wall with a slope, the waste immediately goes into the water. Despite this, you have to use the brush almost all the time.
For a funnel-shaped device, a brush is used in rare cases. Such a candy bar is the most hygienic and economical, because the drain does not require large amounts of water. Unpleasant odors are practically absent. However, when flushing the machine produces a lot of spray.
With the invention called “Anti-Splash”, based on the adjustment of the water level (the lower it is, the lower the burst level), the problem of splashing has been eliminated.
The direction of release does not affect the comfort of using an angle sanitary fixture. It is also impossible to visualize external differences, however, the choice of parameters and location of the sewer entrance in the bathroom may affect the choice.
These types of bowls in the toilet are distinguished:
- Horizontal release. It is used if the bell of the sewer riser is 5-10 cm above the floor.
- Vertical retraction. Ideal for a bathroom where the sewer line is directed to the floor. With the help of such an arrangement, the maximum saving of space is achieved, however, such an arrangement of a sewer line in multi-storey buildings can be encountered infrequently.
- With oblique drain hole. The most common option that was first introduced to the markets. This model assumes a bell at an angle or close to the floor.
To replace the toilet with a horizontal drain on the vertical is not possible. This problem is solvable only in case of a change in the location of the sewer socket.
Basic installation methods
Depending on the type of installation, there are two types of corner toilets: floor and suspended. In the first embodiment, the drain mechanism is placed and mounted on the floor, in the second - on the wall.
The device of a floor monoblock is more familiar and understandable. Installation of this design does not have difficulties and does not take much time.
With an overhead device, the situation is more complicated - here you will need a special corner installation, which is a metal frame. The sewer pipe is brought to the frame, the water supply system and the drain tank is mounted.
The design allows you to hide the water bowl and all communications by closing them with decorative elements. Installation can be drowned in a wall or simply installed in a corner.
There is one more kind of toilet bowl - added. The product is similar to the previous one is mounted in the corner, however, its vertical axis is placed not diagonally, but parallel to the wall. Due to the asymmetrical displacement, the drain unit can be mounted close to the side wall.
On the market are widely represented models with the lower type of water supply to the tank.Less common are devices with side feed. The option with the lower eyeliner is more convenient - it is almost silent at the time of water in the drain tank.
The attached type of construction also, like the previous one, masks all communications either in the wall or in a special nightstand. In most cases, they already come with a cabinet, which greatly simplifies the selection.
Installation scheme using corrugations
Non-standard models of angular products have their own characteristics not only constructive, but also expressed in the process of installation. Initially it is a suitable sewer supply.
However, in low-rise buildings, old buildings, the riser is located along the wall, which complicates the installation of the corner monoblock. To solve this problem, you can use an extension cord, which is used as a corrugated pipe.
Installation begins with the installation of the toilet on the selected location and delineating its boundaries. It also marks areas where it will be necessary to drill holes for dowels. To do this, at the base of the device, on the leg, there are special holes. Now the drain device must be rearranged and drill backlash under fasteners.
Next, the toilet is placed on the original position and fixed with dowels. One side of the corrugated pipe is put into the sewage system, while the docking section must be treated with silicone, the other is put on the outlet.
To install the drain container, it is necessary to combine the drain holes, while trying not to move the existing silicone gasket. This seal protects the design from leaks. After fasten the screws.
Cold water is supplied with a flexible hose. Using a sealant, smear the gap between the base of the device and the floor covering. This prevents debris from getting under the toilet, which simplifies cleaning in the bathroom.
Now check the control of all compounds by typing water in the drain tank and its descent.
Using an adapter to connect
Another method of connecting the toilet to the central sewer system is with the help of pipes. Here you should pay special attention to the type of release monoblock.
Oblique release involves the installation of a monoblock in the floor or in the wall, but in the second embodiment, the fan pipe starts at an angle of 30-40 °. For a vertical drain hole, a wall mounting method is used, and the location of the nozzle should be at an angle of 90 °.
Features installation with vertical drain
Angular models of toilet bowls with a vertical drain hole are most often used in homes with old layouts or in private cottages.
The main positive aspects are that the working parts of the device after installation are not visualized, and the product can be positioned as close as possible to the wall, since there is no need to leave space under the pipe fittings.
After completion of the marking stage, the screw flange is installed in the hole defined for the connection of the drainage system with sewage. All flanges are identical and have the same dimensions. Even in the manufacture of toilets with a vertically located drain complete parts, providing them a tight connection.
Next monoblock returns to the place. It is necessary to ensure that all the holes coincide. Having established a design, turn it a little. At this moment there is a tight docking of fasteners. Tightness is ensured by a sealing ring located between the two parts.
Installation nuances for horizontal release
If the sewer socket is located vertically, it is sufficient to simply connect the toilet with the release of the horizontal type.
The device will be located with a small distance from the wall and the riser, and the connecting elements are practically invisible due to the angular location.
A cuff or a corrugated pipe is used as a contact element for connecting an angular monoblock with the release of a horizontal type to the sewage outlet.
After connection, the contacting areas of the pipes and the seal are processed with silicone. Thus prevent the leakage of working fluid and penetration of stock odors.
If the center of horizontal discharge is displaced with respect to the sewer socket, a corrugation or a set of a corner and a short pipe is used for contact. The toilet itself will be connected through a rubber cuff.
How to connect the toilet with an oblique release?
From the middle of the twentieth century, it was the oblique shape of the sewage outlet that was used to build houses, and the pipeline itself was made of cast iron.
Now it became necessary to dock the drain hole of the toilet bowl with such sockets.
Initially, a mixture of red lead and linseed oil is made in a ratio of 1: 3. The composition must be constantly mixed - red lead quickly sinks to the bottom. A solution is used to drain the toilet.
After that, you need to tightly wind the cab on the socket, with one end should be free. Then surik liquid is applied a second time. Only after this, the release of a monoblock is inserted into the sewer drain.
You can use the other, less dirty, way. This refers to the use of a rubber cuff. It is placed on the drain pipe and connected to the sewer pipe. If necessary, with the help of corrugations, you can move the toilet bowl relative to the central drain.
Connect the drain unit to the plastic drain line in the same way as described above with one clarification: no sealing of the contacts is required.
About the installation of hinged plumbing
The corner installation is installed almost as well as the mounted model. First of all, all communication is output.
Instead of a flexible water supply line, it is better to use a metal pipe to the tank. For the drain system, you can use a corrugated pipe.
The installation frame is fixed on the wall with anchors. This ensures reliable fastening and immobility of the frame structure. The bowl is located at 400-500 mm from the floor level. At the final stage, the toilet is connected to the communications system.
Conclusions and useful video on the topic
Details about the intricacies of choosing the corner model of the toilet can be found in the video:
Rubric useful tips or how to connect the toilet and do not create problems:
The nuances of installing and connecting different installation systems:
In most cases, buying a corner toilet is more a necessity than a personal preference. However, this sanitary item fully justifies its purpose, and installation difficulties do not arise if you follow the scheme.